Heavy Duty Clamps

Diesel Site Complete Intercooler Boot Set For 2008-2010 Ford 6.4L Powerstroke

Diesel Site Complete Intercooler Boot Set For 2008-2010 Ford 6.4L Powerstroke

Diesel Site Complete Intercooler Boot Set For 2008-2010 Ford 6.4L Powerstroke    Diesel Site Complete Intercooler Boot Set For 2008-2010 Ford 6.4L Powerstroke
The kit includes the two boots that connect the intercooler pipes to the intake manifold and the two boots that connect the intercooler pipes to the intercooler. It includes four T-bolt spring clamps for the upper boots and 4 T-bolt spring clamps for the intercooler hoses. The spring bolt clamps are 300 series stainless steel with zinc coated bolts with a 300lb clamping strength. Recommended torque is 60 in/lbs. Extra clamps are available as an option for severe boost numbers. These upper boots are made slightly longer than stock in order to accommodate multiple clamps. In most cases, what is supplied will more than suffice the normal user. This boot kit is designed to replace leaking, deteriorated boots on the 2008 6.4L Ford Powerstroke. Stock boot material is silicon. However, this type of material is NOT oil compatable. This is unacceptable in their application as the Powerstroke incorporates a closed crankcase vent system. This means oil travels thru the intake and comes in constant contact with the boots. This oil contact causes deterioration and leaks due to the incompatibility of the silicon boots and the oil from your crankcase. In fact, if you have seen an oil mist all over the valley of your PSD and wondered where it was coming from, chances are it was caused by leaking, deteriorated stock boots. The stock boots WILL leak air and oil. In many cases, 3-4psi leaks are very common. As an added bonus, this boot kit will keep those who put out higher than normal boost numbers from "blowing boots". Higher boost in the PSD can stretch the limits of a saturated set of factory boots and could blow your boots right off. In some cases, guys with numbers MUCH lower still running the stock boots saturated with oil, having lost their integrity and gripping ability can have their boots slip off as well.

Not quite as dramatic, but still a bummer. Even a stock truck can have problems keeping boots on if they become saturated with oil. As with all of Diesel Site's "Originals", these are QUALITY PARTS. They ordered sample upon sample of hose material and clamps until they were satisfied with the quality of the parts and certain of their integrity in their application.

These boots are made of hose that is reinforced with synthetic fabric. It will not kink or collapse.

The special synthetic rubber is exceptionally resistant to heat, ozone, gasoline, gasohol, methanol, ethanol and diesel fuel. It can withstand the engine heat and 100psi boost pressure. This is virtually "indestructable" boot material. Diesel Site's boots are Flourolastomer lined to handle oil, heat, etc. They have a 5 ply braided center section, and a textured outer rubber cover to grip on to the clamps.

Fluoroelastomers are synthetic, rubber-like materials used in gaskets, O-rings and hoses. Their unique properties make these products ideal for high-performance aerospace and automotive applications or environments that are extremely harsh and challenging.

These are not cheap silicon hoses. These are top quality (best that can be made) tubes that are indivdually molded. These are not cut sections of some hose length. The most important thing you need to know is : Silicone hose is NOT compatible with fuel or oil. The 6.4L has an issue that we all have seen with extraordinarily high charge air temps on the hot side of the intercooler.

For this reason, the OEM boots don't seem to hold up very long with hot programs or in many cases, even stock trucks. When the boot gets hot enough, the nylon fibers in the hose actually melt and break down, causing the boot to tear or just stretch enough to slip out from under the clamp.

For this reason, they re-engineered their new boots with a special synthetic fiber, similar to those used in aerospace applications and body armor. This fabric that is exceptionally resistant to heat and is extremely strong. We value your business and we are not satisfied until you are.

Rudy's Performance Parts ships products from multiple warehouses across the country in order to get your products to you the quickest way possible. We are not able to send ANY race use products to the state of California. According to the EPA Clean Air Act, they are illegal for use on any Federal, State, or Local public highways and illegal use is punishable by the penalties enacted by the mentioned laws.

Rudy's Performance Parts does not condone or promote illegal use of these products. All of our parts and accessories are returnable and refundable. The item in which you are returning MUST be unused, uninstalled, in the original condition, and in the original packaging. If you are returning an item due to an error caused by Rudys Performance Parts or its business partners i. If you are sending an item back, we recommend using a service with tracking and signature confirmation.

This product is NOT for sale or use in California. The item "Diesel Site Complete Intercooler Boot Set For 2008-2010 Ford 6.4L Powerstroke" is in sale since Monday, April 20, 2020. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Turbo Chargers & Parts". The seller is "rudys_performance_parts" and is located in Chapel Hill, North Carolina.

This item can be shipped to United States.

  • Interchange Part Number: Diesel Site
  • California Prop 65 Warning: WARNING: Cancer & Reproductive Harm
  • Type: Intercooler Boots
  • Manufacturer Part Number: DSICBK64
  • Brand: Dieselsite
  • Fitment Type: Direct Replacement
  • CA Propostion 65 Message: WARNING: Cancer & Reproductive Harm


Diesel Site Complete Intercooler Boot Set For 2008-2010 Ford 6.4L Powerstroke    Diesel Site Complete Intercooler Boot Set For 2008-2010 Ford 6.4L Powerstroke